Owner's manual
Application example
Sturtz milling: proling of carbon bre
Facts and demands:•
- Tilting of tool 2-10 degrees
- High rpm and feed rate
- Primary structure carbon bre
- Hand held pneumatic machine design
- 2D and 3D feature solutions
- Good surface nish and dimensions
Solutions•
- CoroMill 390
- Cutter: R390-032A32-11H
- CD10 PCD inserts (3mm modied radii)
Cutting data•
- Vf: 1800 mm/min
- 2mm depth of cut.
- 5 degree sturtz angle.
- fz: 0.2mm/tooth
Suitable process for large areas of shallow curvature, i.e. •
many aircraft wing and fuselage components.
SANDVIK COROMANT USER’S GUIDE - COMPOSITE SOLUTIONS 45