Owner manual

58
•GC1105–UniquethinPVD(TiAlN)
coatingonhardfinegrainedsubstrate.
–Excellentadhesiontothesubstrate
evenonsharpedges,goodhothard-
ness.
•
GC1115–UniqueoxidePVDcoatedon
micro-grainedcarbide.
–Goodresistanceagainstbuilt-upforma-
tionandcraterwear.Idealformore
unstableconditions.
•GC1125–PVDcoatedmicro-grained
carbide.
–Goodresistancetothermalshockand
notchwear.Firstchoiceforparting-off
operations.
•
GC1030–Uniquemulti-layerPVD(TiAlN)
coating.
–ImprovedwearresistanceoverGC1025
withsametoughness.Highedgeline
security.
•GC1010–PVDcoatedmicro-grainedcar-
bide.
–Resistancetoplasticdeformationand
flankwearduetohothardness.
•GC5015–Uncoatedcermet.
–Excellentresistancetobuilt-upforma-
tionandplasticdeformation.
•S05F–ThinCVDcoatingonhardfine
grainedsubstrate.
–Forapplicationswherenotchisnota
significantproblemieroundinsertand
finishingwithsmallenteringangle.
•CT530–Uncoatedcermetgrade.
–Forfinishingoperations.
•CB7015–PVDcoatedCBNgradewith
ceramicbinderforcontinuescuts.
–Forgoodsurfacefinish.
Engineered solution
Developedtooptimizetheroughingfrom
barstock.
•EngineeredCoromantUdrill
–dia22-35mm
–WCMX,GC1020,H13A
•Startcuttingdatarecommendationfor
titaniumandcobaltchromium.
–Speedv
c
=50-80m/min.
–Feedf
n
=0.08-0.12mm/r.
Carbide insert grades