Instruction manual

GB-27
Using the USB
By connecting a USB mass storage device (including USB ash memory, USB ash
players or memory cards) to this unit, you can enjoy the device’s stored music through
the powerful speakers of this unit.
1. Insert the USB device’s USB plug into the port at the rear of the CD player
2. Press the IN button repeatedly on the top of the CD player or press the
button on the remote control to select the USB function.
3. The device’s stored music will be played automatically.
For devices with a USB cable:
1. Insert one plug of the USB cable
(not supplied) to the port at
the rear of the CD player.
2. Insert the other plug of the USB
cable to the USB output terminal of
the USB device.
For memory cards:
1. Insert the memory card into a card reader (not supplied) at the rear of the CD
player.
2. Use a USB cable (not supplied) to connect the card reader into the socket on the
unit.
The CD Player
If the USB device is corrupted, this unit will not be able to detect and play the music stored.
Format the USB mass storage device and restore the music on the device with a computer.
AUX Input
There is a RCA (L/R) sockets located at the back of the unit. Analogue audio sound
signals from other sources can be input to the unit through these 2 sockets.
1. Connect the input to another audio device via an audio cable (not included) with
RCA (L/R) socket.
2. Press the IN button repeatedly or press the button on the remote control to
select the AUX Input function until “AUX“ appears on the display.
3. Adjust the volume control for your desired sound output level.
SHFTPPH10_IB_final101208.indd 27 12/8/10 2:10 PM