Instruction manual

GB-25
Program Play
1. Insert a disc and press the button on the top of the CD player or on the remote
control when it starts playing.
2. Press the PROG button on the remote control.
3. Press the buttons on the top of the CD player or press the , 0-9, 10+,
buttons on the remote control to select the desired track number and then press
the PROG button to conrm your program.
4. Repeat the above step 3 to enter more tracks.
5. Press the button on the top of the CD player or on the remote control to start
program play.
6. Press the button on the top of the CD player or on the remote control to stop
the program play and press the button to start program play again. Press the
button twice to clear the programming mode.
Random Play (CD and MP3 discs)
The CD can be played randomly. Random play begins by pressing the RANDOM
button on the remote control in play mode.
Playing the Beginning (Intro) of each Track
In stop mode, press the INTRO button on the remote control to play the beginning of
each track consecutively. The playing time of each track is 10 seconds.
When you hear the desired track, press the button twice.
Playing Repeatedly
• For CD disc, ONE and ALL repeat play can be set by pressing the MODE button on
the remote control repeatedly.
First press To repeat the same track over and over again (“REP” and “TRK” will ash)
Second press To repeat all tracks on a disc and then play them again and again (“REP”
will stay lit).
Third press To cancel the repeat playing (“REP” o).
• You can use the below function to repeat any part of a disc.
When the disc is playing, press the A-B button on the remote control at the
beginning of the content that needs repeat playing. Press the A-B button again at
the end of the content that needs repeat playing. Then the player will repeatedly
play between A and B until you press the A-B button again to cancel the repeat
and the setting returns to normal playing mode.
• Random play will not shue the programmed music list.
• Maximum 20 tracks can be programmed.
A-B repeat function can only be used within the same track.
SHFTPPH10_IB_final101208.indd 25 12/8/10 2:10 PM