Instruction manual
GB-19
Programming DAB Stations
You can save up to 20 DAB stations in the unit memory.
1. Press the
buttons on the top of the CD player or on the remote control to
select your desired DAB channels.
2. Press the button on the top of the CD player or on the remote control to
conrm, and tune to your selected channel.
3. Press the PROG button and then press the
buttons on the top of the
CD player or on the remote control to select a location for storing your desired
station. You can also use the 0-9 buttons to input a number directly. If the number
is larger than 10, press the 10+ button once or more to select the rst digit you
want and then use the 0-9 buttons to input the second digit.
4. Press the PROG button again for conrmation until “P # SAVED” is displayed
(# indicating the preset number your selected).
Tuning to Preset DAB Stations
• Press the
buttons on the top of the CD player or on the remote control until
the desired preset station is displayed. The unit will tune to the selected station
automatically.
• You can also use the 0-9 buttons to input a number directly and tune to the service
associated with this number.
• To input a number larger than 10, press the 10+ button once or more to select the rst
digit you want and then use the 0-9 buttons to input the second digit.
DAB Information Display
• You can view the DAB service information in the following modes. Depending on the
DAB radio station you are tuning to, some information modes may be unavailable. Press
the DISPLAY button repeatedly to view the following information.
Ensemble Name
Service Name
DLS (Dynamic Label Segment)
Date and Clock
Signal Strength
PTY (Program Type)
Bitrate
Audio Mode
(Stereo/Mono/Stereo Joint)
SHFTPPH10_IB_final101208.indd 19 12/8/10 2:10 PM