Instruction manual

GB-16
Setting the Daily on Timer
You can use the setting timer to make the unit automatically turn on at a certain time
everyday from standby. When the timer is on, the timer indicator “ ” will be displayed.
The clock must be correctly set for the timer to operate correctly.
1. In Standby mode, press the CLOCK button on the remote control, then press the
SLEEP/TIMER button, “TIMER SET” will display and the hour indicator will ash.
2. Set the hour with the VOL
+
/
–
buttons.
3. Press the SLEEP/TIMER button on the remote control, the minute indicator will
ash.
4. Set the minute with the VOL
+
/
–
buttons.
5. Press the SLEEP/TIMER button on the remote control, the selected time is set,
and the “OFF” indicator will ash. Then set the daily timer to “ON” (daily timer is
active) or “OFF” (daily timer is inactive) by pressing the VOL
+
/
–
buttons.
6. Press the SLEEP/TIMER button to conrm the setting.
To Cancel the Daily Timer
In Standby mode, press the CLOCK button on the remote control once, then press the
SLEEP/TIMER button repeatedly until “ON” is displayed.
Press the VOL
+
/
–
buttons to set the daily timer to “OFF”. Press the SLEEP/TIMER
button again to conrm.
Disconnecting the mains from the unit also cancels the daily timer.
• You can set the daily timer only in Standby mode.
• The operating time of every step shouldn’t be longer than 30 seconds or it will return to
the time display.
• The sound source on the automatic on mode is the same as the sound source the last
time the unit was turned o by the standby switch.
• The volume automatically comes on at level 12 when the last volume setting is larger
than 12.
• The unit does not have the timer turn o function, but you can set the turn o time
through the SLEEP TIMER function (refer to page 15 for details).
SHFTPPH10_IB_final101208.indd 16 12/8/10 2:10 PM