Instruction manual

20
Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray aerosol at or near the unit.
To connect your device to the unit via Bluetooth, follow the steps below:
1. Press SOURCE repeatedly on the unit or press
on the remote control to select
Bluetooth mode. Bluetooth indicator will ash until it pairs.
2. Activate your Bluetooth device and select the search mode.
3. “S42SWLH13” will appear on your Bluetooth device.
4. Select “S42SWLH13” and enter “0000” for password if necessary.
5. On successful pairing, the unit will beep and the blue LED will light up solidly.
NFC (Near Field Communication) Operation
Pair your NFC-enabled mobile device directly with this unit by just a single tap.
1. Activate NFC on your mobile device.
2. Tap the mobile device on the
icon of the unit until a beep is heard.
3. Operate your mobile device directly for playback features.
4. Tap again on the
icon of the unit to disconnect.
This function only works with mobile devices that support NFC technology.
STANDBY AUX MP3 LINK BT COAXIAL OPTICAL HDMI1 HDMI2
S42SWLH13_IB_RC_130531_Michelle.indd 20 31/5/13 5:28 PM