Instruction manual

13
Use an electronic stud nder to check the wall type before drilling and mounting.
ø8mm
50mm
ø3mm
30mm
110 mm
Wall (Front view)
Electronic stud nder
(not included)
Solid wall
Drywall, Plaster wall,
Lath wall, etc.
Drill
(not included)
4. Firmly x 1 dowel into each hole in the wall.
Dowel
Solid wall (i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
3. Drill 2 parallel holes (Ø 3-8 mm each according to wall type) in the wall. The distance
between the holes should be 110 mm.
S42SWLH13_IB_RC_130531_Michelle.indd 13 31/5/13 5:28 PM