Instruction Manual Soundbar with wireless sub-woofer S42SWLH13 S42SWLH13_IB_RC_130531_Michelle.
S42SWLH13_IB_RC_130531_Michelle.
Contents Safety Warnings.....................................................................................................................4 Unpacking..............................................................................................................................6 Product Overview..................................................................................................................7 The Main Unit.......................................................................................
Safety Warnings • Read all the instructions carefully before using the unit and keep them for future reference. • Retain the manual. If you pass the unit onto a third party make sure to include this manual. • Check that the voltage marked on the rating label matches your mains voltage. Damage • Please inspect the unit for damage after unpacking.
Interference • Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound. Service • To reduce the risk of electric shock, do not remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel. • Do not open any fixed covers as this may expose dangerous voltages.
Thank you for purchasing your new Sandstrøm Soundbar. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference. Unpacking Remove all items from the packaging. Retain the packaging.
Product Overview The Main Unit Front View 1 2 3 4 STANDBY AUX MP3 LINK BT COAXIAL 1. Speakers OPTICAL 1 HDMI1 HDMI2 3. Status LED Indicators • Lights up red when the unit is in STANDBY mode. • Lights up blue in Bluetooth mode. • Lights up amber in AUX, MP3, COAXIAL, OPTICAL and HDMI modes. 2. Remote Control Sensor Receives signal from the remote control. 4. NFC (Near Field Communication) Sensor Pairs with Bluetooth device. Top View STANDBY SOURCE VOL – VOL + 1 234 1.
Rear View 1 2 34 5 MP3 LINK L HDMI IN 1 AUX R HDMI IN 2 COAXIAL MP3 LINK OPTICAL DC IN HDMI OUT 6 7 8 1. AUX (L/R) Sockets 5. DC IN Socket 2. MP3 LINK Socket 6. HDMI IN 1 Socket 3. COAXIAL Socket 7. HDMI IN 2 Socket 4. OPTICAL Socket 8. HDMI OUT Socket Rear View of Sub-woofer AC ~ 1 2 1. Reset Button Resets the sub-woofer. 2. AC~ Power Socket 8 S42SWLH13_IB_RC_130531_Michelle.
Remote Control 1. Button Switches the unit between ON and STANDBY modes. 1 2. AUX/MP3 Button Switches to AUX or MP3 mode. 2 3 3. VOL + Button Increases the volume. 4 4. EQ Button Switches between preset equalisers. 5 6 7 8 AUX/ MP3 LINK VOL+ EQ MUTE 9 S-BASS 10 VOL– COAXIAL OPTICAL 11 HDMI 1 HDMI 2 12 5. VOL – Button Decreases the volume. 6. COAXIAL Button Connects to devices with coaxial output. 7. HDMI 1 Button Connects to devices with HDMI output. 8. Button Selects Bluetooth mode.
Remove the Plastic Strip from the Remote Control Remove the plastic strip from the battery if the battery is being used for the first time. It is located at the bottom rear of the remote control. Battery Replacement for the Remote Control The remote control requires a CR2032, 3V Lithium battery (included). 1. Press and slide the back cover to open the battery compartment of the remote control. 2. Replace the old battery with a new one, with the positive polarity (+) facing upward.
Handling the Battery • Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property. • Install the battery correctly in the battery compartment. Normally the battery’s positive polarity (+) will face up. • When the battery is exhausted, the remote control will not function. • Only use the battery type indicated in this manual. • Do not dispose of the used battery as domestic waste.
Wall Mounting Assembly is required. Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage (if you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall). The supplied wall bracket is only for use on vertical walls constructed from solid brick, solid concrete, solid wood, solid wooden battens, drywall, plaster wall and lath wall.
Use an electronic stud finder to check the wall type before drilling and mounting. 3. Drill 2 parallel holes (Ø 3-8 mm each according to wall type) in the wall. The distance between the holes should be 110 mm. Solid wall ø8mm 50mm ø3mm 30mm Electronic stud finder (not included) Drywall, Plaster wall, Lath wall, etc. Drill (not included) 110 mm Wall (Front view) 4. Firmly fix 1 dowel into each hole in the wall. Dowel Solid wall (i.e.
5. Insert 1 screw into each dowel. Be sure to leave a 5 mm gap between the wall and the screw’s head. 5 mm Screw Dowel Wall (Side view) 6. Lift the unit with the attached wall bracket over the heads of the screws and slot into place. Main unit (Side view) Dowel Wall (Side view) Wall bracket Screw 14 S42SWLH13_IB_RC_130531_Michelle.
Connections Using the HDMI Connection Use an HDMI cable (not included) to connect an AV device’s HDMI OUT socket to the unit’s HDMI IN 1 or HDMI IN 2 socket. Use another HDMI cable (not included) to connect a visual device’s HDMI IN socket to the unit’s HDMI OUT socket. MP3 LINK L AUX HDMI IN 1 R COAXIAL MP3 LINK HDMI IN 2 OPTICAL DC IN HDMI OUT HDMI cable (not included) AV device Visual device Use the L-shaped adapter (if necessary) in areas with insufficient space to connect the HDMI cable.
Using the MP3 LINK Connection Use 3.5mm to 3.5mm stereo audio cable (not included) to connect a mobile device’s earphone socket to the unit’s MP3 LINK (3.5mm stereo audio input) socket. 3.5mm to 3.5mm stereo audio cable (not included) MP3 LINK L AUX HDMI IN 1 R COAXIAL MP3 LINK HDMI IN 2 OPTICAL DC IN HDMI OUT Using the OPTICAL Connection Use an optical cable (not included) to connect an audio device’s OPTICAL OUT socket to the unit’s OPTICAL (input) socket.
Connecting to the Mains Supply • The Soundbar and sub-woofer are designed to operate with the supplied mains adapter and mains cables. • Connecting the Soundbar to any other power source may damage the unit. Unwind the mains adapter and mains cable to their full length. Connect the mains adapter to the DC IN socket of the unit, then connect the mains cable to the mains adapter and into a mains socket. • Connect the mains cable to the AC~ socket of the sub-woofer and then into a mains socket.
General Operation • During STANDBY mode, the STANDBY indicator will light up red. Press the main unit or on the remote control to turn the unit on. STANDBY on • Press • Disconnect the mains plug from the mains socket if you want to switch the unit off completely. STANDBY to switch the unit back to STANDBY mode. When the unit volume is close to mute or is idle for approximately 15 minutes, it will automatically switch to standby.
LINE IN Operation There are AUX, MP3 LINK, COAXIAL, OPTICAL and HDMI (input) sockets located at the rear of the unit. Analogue audio sound signals from other sources can be connected to the unit through these sockets. 1. Before connecting to the mains socket: • Use an optical cable (not included) to connect the audio device’s OPTICAL OUT socket to the unit’s OPTICAL (input) socket. • Use the audio L/R cable to connect the device’s audio output sockets to the unit’s AUX L/R (input) sockets.
To connect your device to the unit via Bluetooth, follow the steps below: 1. Press SOURCE repeatedly on the unit or press on the remote control to select Bluetooth mode. Bluetooth indicator will flash until it pairs. 2. Activate your Bluetooth device and select the search mode. 3. “S42SWLH13” will appear on your Bluetooth device. 4. Select “S42SWLH13” and enter “0000” for password if necessary. 5. On successful pairing, the unit will beep and the blue LED will light up solidly.
Hints and Tips If a problem does occur, it may often be due to something very minor. The following table contains various tips. Problem Solution No power. • Ensure the mains cable is connected securely at both ends. • Make sure that the ON mode is selected. The remote control does not function. • Use the remote control near the unit. • Point the remote control at the remote control sensor on the unit. • Replace the battery in the remote control with a new one.
Specifications Model Power Supply S42SWLH13 Input: 100-240V ~ 50/60Hz, 1.35A Output: 27.0V, 2.5A ECO Standby Power < 0.5W Output Power 50W x 2 Soundbar Power Consumption 30W Frequency Response 200Hz - 20kHz Bluetooth Signal to Noise Ratio Bluetooth 2.0 (A2DP) > 70dB AUX Input 1V ± 200mv Net Weight 1.29kg Dimension 900mm(W) x 48.
For general information about this appliance and handy hints and tips, please visit www.knowhow.com/knowledgebank or call 0844 5611234. Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK customers only) Calls charged at National Rate.
DSG Retail Ltd. (co. no. 504877) Maylands Avenue, Hemel Hempstead, Herts., HP2 7TG, UK IB-S42SWLH13-130531V3 S42SWLH13_IB_RC_130531_Michelle.
