Product Manual

s05nmdl2sm-rev0716
sandpi p erpump .com
11 • Model S05 Non-Metallic
Air Valve with Stroke Indicator Assembly Drawing,
Parts List
1-E
1-F
1-C
1-D
1-B
1-B
1-A
1-G
1-E
1-F
1-C
1-D
1-J
1-K
1-H
1-I
ATEX Compliant
MAIN AIR VALVE ASSEMBLY PARTS LIST
Item Part Number Description Qty
1 031.167.000 Air Valve Assembly 1
1-A 095.106.559 Body, Air Valve 1
1-B 031.134.000 Sleeve and Spool Set 1
1-C 560.101.360 O-Ring 8
1-D 132.030.552 Bumper 2
1-E 165.123.147 End Cap 2
1-F 560.029.360 O-Ring 2
1-G 675.062.115 End Cap Retainer 2
1-H 210.008.330 Safety Clip 1
1-I 530.031.550 Mufer 1
1-J 165.109.559 Mufer Cap 1
1-K 710.011.115 Self-Tapping Screw 4
For Pumps with Virgin PTFE coated hardware:
1 031.167.002 Air Valve Assembly 1
1-G 675.062.308 End Cap Retainer 2
1-J 710.011.308 Self Tapping Screw 4
(Includes all other items used on 031.166.000 above)
For Pumps with alternate Mesh Mufer or Piped Exhaust:
1 031.169.000 Air Valve Assembly 1
(Includes all items used on 031.167.000 above minus 1.H, 1.I and 1.J)
Air Distribution Valve Servicing
See repair parts drawing, remove screws.
Step 1: Remove end cap retainer (1-G).
Step 2: Remove end cap (1-E), bumper (1-D).
Step 3: Remove spool part of (1-B) (caution, do not scratch).
Step 4: Press sleeve (1-B) from body (1-A).
Step 5: Inspect O-Rings (1-C) and replace if necessary.
Step 6: Lightly lubricate O-Rings (1-C) on sleeve (1-B).
Step 7: Press sleeve (1-B) into body (1-A).
Step 8: Reassemble in reverse order.
Note: Sleeve and spool (1-B) set is match ground to a specied clearance
sleeve and spools (1-B) cannot be interchanged.
4: AIR END