Product Manual

s05mdl1sm-rev0814
sandpi p erpump .com
Model S05 Metallic • 20
Dual Port Suction and Discharge Repair Parts List
Item Part Number Description Qty.
10* 170.045.115 Capscrew,Hex5/16-18X1.25 24
 170.045.330 Capscrew,Hex5/16-18X1.25 24
17* 312.110.157E Elbow,SuctionBSP(tapered) 2
(replaces 312.110.157)
 312.110.157N Elbow,Suction1/2"NPT 2
(replaces 312.110.157)
18* 312.111.157E Elbow,DischargeBSP(tapered) 2
(replaces 312.111.157)
 312.111.157N Elbow,Discharge1/2"NPT 2
(replaces 312.111.157)
23* 518.157.157 Manifold(notrequired) 0
27* 545.004.115 Nut,Hex5/16.18 20
 545.004.330 Nut,Hex5/16.18 20
29* 560.083.360 O-Ring(AlumManifold)(notrequired) 0 
 560.083.363 O-Ring(AlumManifold)(notrequired) 0
 560.083.364 O-Ring(AlumManifold)(notrequired) 0
 560.083.365 O-Ring(AlumManifold)(notrequired) 0
 720.064.600 Seal(AlumManifold)(notrequired) 0
37* 900.004.115 LockWasher 32
 900.004.330 LockWasher 32
Dual Port (Aluminum Model Only)
Illustration for Dual Port Suction and Single or Dual Port Discharge
(Not available for Stainless Steel or Alloy-C Equipped Models)
*Dual suction/dual discharge = no manifold.
ATEX Compliant
IMPORTANT
Read these instructions completely, before
installation and start-up. It is the responsibility
of the purchaser to retain this manual
for reference. Failure to comply with the
recommendations stated in this manual will
damage the pump, and void factory warranty.
1/2” NPT or 1/2” BSP Tapered
INTERNAL (DUAL PORT PARTS ONLY)
1” NPT or 1” BSP Tapered EXTERNAL
1/2” NPT or 1/2” BSP Tapered INTERNAL
(THIS PART REQUIRED FOR SINGLE
PORT SUCTION ONLY)
1” NPT or 1” BSP Tapered EXTERNAL
1/2” NPT or 1/2” BSP Tapered INTERNAL
(THIS PART REQUIRED FOR SINGLE
PORT SUCTION ONLY)
1/2” NPT or 1/2” BSP Tapered INTERNAL
(DUAL PORT PARTS ONLY)
6: OPTIONAL