Product Manual

s05mdl1sm-rev0814
sandpi p erpump .com
13 • Model S05 Metallic
ATEX Compliant
Air Distribution Valve Assembly for Polypropylene
Center Sections
Main Air Valve Assembly Parts List
Item Part Number Description Qty
1 031.166.000 Air Valve Assembly 1
1-A 095.106.551 Body, Air Valve 1
1-B 031.132.000 Sleeve and Spool Set 1
1-C 560.101.360 O-Ring 8
1-E 165.122.551 End Cap 2
1-F 560.026.360 O-Ring 2
1-G 675.062.115 End Cap Retainer 2
1-H 530.031.550 Mufer 1
1-I 165.109.551 Mufer Cap 1
1-J 710.011.115 Self-Tapping Screw 4
For Pumps with Virgin PTFE coated hardware:
1 031.166.002 Air Valve Assembly 1
1-G 675.062.308 End Cap Retainer 2
1-J 710.011.308 Self Tapping Screw 4
(Includes all other items used on 031.166.000 above)
For Pumps with alternate Mesh or Sound Dampening Mufers or
Piped Exhaust:
1 031.168.000 Air Valve Assembly 1
(Includes all items used on 031.166.000 above minus 1-H, 1-I and 1-J)
Main Air Valve Assembly Parts List
(For conductive ploypropylene center only)
Item Part Number Description Qty
1 031.168.002 Air Valve Assembly 1
1-A 095.106.559 Body, Air Valve 1
1-B 031.132.000 Sleeve and Spool Set 1
1-C 560.101.360 O-Ring 8
1-E 165.122.558 End Cap 2
1-F 560.026.360 O-Ring 2
1-G 675.062.115 End Cap Retainer 2
Air Distribution Valve Servicing
See repair parts drawing, remove screws.
Step 1: Remove end cap retainer (1-G).
Step 2: Remove end cap (1-E).
Step 3: Remove spool part of (1-B) (caution: do not scratch).
Step 4: Press sleeve (1-B) from body (1-A).
Step 5: Inspect O-Rings (1-C) and replace if necessary.
Step 6: Lightly lubricate O-Rings (1-C) on sleeve (1-B).
Step 7: Press sleeve (1-B) into body (1-A).
Step 8: Reassemble in reverse order, starting with step 3.
Note: Sleeve and spool (1-B) set is match ground to a specied clearance
sleeve and spools (1-B) cannot be interchanged.
IMPORTANT
Read these instructions completely, before installation
and start-up. It is the responsibility of the purchaser
to retain this manual for reference. Failure to comply
with the recommendations stated in this manual will
damage the pump, and void factory warranty.
4: AIR END