Owner manual

Model GH2 Page 8
11/04
USE OF Virgin PTFE DIAPHRAGM:
When the PTFE diaphragm (item 64) is
required, an outer plate (item 63) and inner plate (item 66) must be used to plug the diaphragm’s center hole. Sandwich the PTFE
and elastomeric diaphragms as shown. Torque the outer plate to the hex nut (item 68), utilizing the lock washer (item 67). Torque at 40 ft/lbs (54.23 Newton meters). Fill the fluid cell as specified in the DIAPHRAGM SERVICING section of this manual. Note: Use only 2800 ml. driver fluid when using PTFE. See DIAPHRAGM SERVICING.
©2009 IDEX AODD, Inc. All rights reserved. ®Warren Rupp, SandPIPER,and Tranquilizer are registered tradenames of IDEX AODD, Inc. Printed in U.S.A.