User guide

The uEFI Shell AM5030 uEFI BIOS
Page 50 ID 1037-1209, Rev. 1.0
P R E L I M I N A R Y
SETTINGS: pxe: Select PXE boot network adapter
disabled: No PXE boot available
[all]: Try all Ethernet devices round robin for PXE boot
gbe_a: Try only front port a for PXE boot
gbe_b: Try only front port b for PXE boot
amc_a: Try only AMC port a for PXE boot
amc_b: Try only AMC port b for PXE boot
xaui_a: Try only XAUI port a for PXE boot
xaui_b: Try only XAUI port b for PXE boot
SATAMode: Determines how SATA controllers operate
disabled: Disable the SATA ports
[ide]: SATA ports operate as two IDE controllers
ahci: SATA ports operate as one 6-port AHCI controller
raid: SATA ports form a RAID device
amcport_2: Select SATA port configuration on AMC port 2
[e-keying]: Enable/disable AMC port 2 via e-keying
forced_on: AMC port 2 is always enabled
amcport_3: Select SATA port configuration on AMC port 3
[e-keying]: Enable/disable AMC port 3 via e-keying
forced_on: AMC port 3 is always enabled
amcport_12: Select SATA port configuration on AMC port 12
[e-keying]: Enable/disable AMC port 12 via e-keying
forced_on: AMC port 12 is always enabled
Note:
For non-standard MicroTCA racks, this function must be set to
forced_on in order to be able to use the SATA ports.
amcport_13: Select SATA port configuration on AMC port 13
[e-keying]: Enable/disable AMC port 13 via e-keying
forced_on: AMC port 13 is always enabled
Note:
For non-standard MicroTCA racks, this function must be set to
forced_on in order to be able to use the SATA ports.
storageOrom: Launch Storage PCI Option ROMs
disabled: Do not launch storage PCI option ROMs. This includes the
onboard RAID option ROM.
[enabled]: Launch storage option ROMs, if present
kboardconfig