User guide

AM5030 uEFI BIOS Advanced Setup
ID 1037-1209, Rev. 1.0 Page 17
P R E L I M I N A R Y
3.2.6 Device Power Delay
Default setting: Auto
3.2.7 Mass Storage Devices
This function shows a list of connected USB mass storage devices and allows the user to select
how the respective device is to be treated.
SETTING DESCRIPTION
Auto Use this setting to automatically select the maximum time the device will take before it
properly reports itself to the host controller.
The default value for a root port is 100 ms. For a hub port, the delay is taken from the hub
descriptor.
Manual Use this setting to manually select the maximum time the device will take before it properly
reports itself to the host controller.
The delay range is 1..40 seconds in one second increments.