SanDisk Connect™ Wireless Flash Drive QUICK START GUIDE
GET STARTED 1. Charge your Wireless Drive Plug the Drive into a computer or USB-AC adaptor. A full charge can take up to 2 hours. 2) Turn on the Wireless Drive Press the Wi-Fi power button until both LEDs flash 3 times. 3) Download the Wireless Flash Drive app Download the free Wireless Flash Drive app from your mobile device application store.
) Connect wirelessly to the Wireless Drive (iOS app users only; if you’re an Android™ app user, skip this step.) Go to Wi-Fi Settings on your mobile devices and select the Wireless Drive network from the list of available Wi-Fi networks. Note: No Internet connection or router is required. Launch the Wireless Flash Drive app and start using your drive! Note: For privacy, you can set a Wireless Flash Drive Wi-Fi password in Settings > Password.
WAYS TO LOAD CONTENT CONNECT VIA WEB BROWSER You can also access content on the Wireless Drive without downloading the Wireless Flash Drive app. 1. Connect to the Wireless Drive Wi-Fi network. 2. Launch an Internet browser and go to www.sandisk.com/WFD/ to access the Wireless Drive content.
CONNECT TO THE INTERNET Your mobile device or computer can wirelessly access content on your Drive and at the same time remain connected to the Internet as long as a wireless Internet network is available. (Some wireless networks might block this functionality.) 1. Connect to your Wireless Drive and open the app. 2. Go to Settings > Internet Connection Mode and turn on Enable Internet Connection. 3. Select the desired network from the list of available networks. 4.
NEED MORE HELP? Support: www.sandisk.com/support Watch the Wireless Flash Drive tutorial videos for more information. You can find them on the Wireless Flash Drive and the Support website. FAQs and Forums can also be found on the Support website. WIRELESS FLASH DRIVE INFO Wireless Flash Drive User Manual: Go to www.sandisk.com/support > Connected Memory > Downloads and click Wireless Flash Drive User Manual. Safety and Handling: See “Safety and Care” in the Wireless Flash Drive User Manual.
Note: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Recycling SanDisk Connect® Wireless Flash Drive Do not dispose of either the SanDisk Connect® Wireless Flash Drive with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems are not available, please return unwanted accessories to any SanDisk Approved Service Center in your region.
