User manual

Page |
9
2.1.3. Shipping Case Contents
Table 2: Shipping Contents
APS-3
UHF Radio Antenna
2GB SD Card
SIM Card Holder**
Allegro MX*
(2) Lithium-ion
Batteries
Battery Charger
AC Adapter
Archer*
Power Cable;
unterminated
Controller Cable
Data Cable*
*- Optional Items
** - SIM Card not included
A full APS-3 system consists of the following items:
Items
What to use it for
UHF Radio Antenna
A UHF Radio Antenna should be connected to the
APS-3’s TNC connector before powering ON
Lithium-ion Battery
Provides internal power to the APS-3
Battery Charger
Charge the lithium-ion batteries
Handheld Controller
Device
Configure and control the APS-3
Controller Cable
RS232/Serial connectivity to handheld controller or
computer. [Required when upgrading firmware]
Data Cable
Communication to devices such as external radios or
modems
Power Cable
Provide 9-15 VDC external power with use of battery
or power supply
Preinstalled Items
What to use it for
SD Card
2GB memory card for internal data logging
SIM Card Holder
A secure GSM SIM card receptacle