Product manual

Product Specifications
2-2 SanDisk Industrial Grade SD Product Manual, Rev. 1.0 © 2003 SANDISK CORPORATION
2.3. Typical Card Power Requirements
Table 2-3. Card Power Requirements
VDD (ripple: max, 60 mV peak to peak) 2.7 V – 3.6 V
(Ta = 25°C @3 V)
Value Measurement Notes
Sleep 250 uA Max
Read 50 mA Typical
Write 75 mA Typical
2.4. System Performance
Table 2-4. System Performance
Typical Maximum
Block Read Access Time
Binary Products
MLC Products
1.5msec
10msec
100msec
100msec
Block Write Access Time
Binary Products
MLC Products
24msec
40msec
250msec
250msec
CMD1 to Ready
(after power up)
50msec 500msec
Sleep to Ready 1msec 2msec
NOTES: All values quoted are under the following conditions:
1) Voltage range: 2.7 V to 3.6 V.
2) Temperature range: -25° C to 85° C.
3) Are independent of the SD Card clock frequency.
2.5. System Reliability and Maintenance
Table 2-5. System Reliability and Maintenance Specifications
MTBF > 2,000,000 hours
Preventive Maintenance None
Data Reliability < 1 non-recoverable error in 10
14
bits read
Endurance 600,000 write/erase cycles (typical)