User Manual
ii TriFlash with SD Interface Product Manual (Preliminary), Rev. 1.2 © 2002/2003 SANDISK CORPORATION
SanDisk
®
Corporation general policy does not recommend the use of its products in life support applications where in a failure
or malfunction of the product may directly threaten life or injury. Per SanDisk Terms and Conditions of Sale, the user of SanDisk
products in life support applications assumes all risk of such use and indemnifies SanDisk against all damages.
The information in this manual is subject to change without notice.
SanDisk Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing, performance, or use of this material.
All parts of the TriFlash documentation are protected by copyright law and all rights are reserved. This documentation may not,
in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable
form without prior consent, in writing, from SanDisk Corporation.
SanDisk and the SanDisk logo are registered trademarks of SanDisk Corporation.
Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of
their respective companies.
© 2002/2003 SanDisk Corporation. All rights reserved.
SanDisk products are covered or licensed under one or more of the following U.S. Patent Nos. 5,070,032; 5,095,344; 5,168,465;
5,172,338; 5,198,380; 5,200,959; 5,268,318; 5,268,870; 5,272,669; 5,418,752; 5,602,987. Other U.S. and foreign patents
awarded and pending.
Lit. No. 80-13-00171 Rev. 1.2 3/2003 Printed in U.S.A.
Revision History
• Revision 0.1—Preliminary draft.
• Revision 0.5—First edits from marketing and engineering.
• Revision 0.8—Manual reformatted, minor editorial and technical changes.
• Revision 0.9—Minor editorial and technical changes.
• Revision 1.0—Minor editorial and technical changes to figures.
• Revision 1.1—Minor editorial and technical changes.
• Revision 1.2—Changed power requirements in Section 2.2, Table 2.2; updated addresses in Appendix A