User Manual
Introduction to the TriFlash with SD Interface
TriFlash with SD Interface Product Manual (Preliminary), Rev. 1.2 © 2002/2003 SANDISK CORPORATION
1-11
1.5.8.5. Read and Write Operations
In SPI mode, both single and multiple block data transfer modes are supported.
1.5.8.6. Data Transfer Rate
In the SPI mode, only one data line is used for each direction. The SPI mode data transfer rate is the same as the SD
Bus mode data transfer rate when using one data line only (up to 25Mbits per second).
1.5.8.7. Data Protection in the TriFlash
Same as for the SD Bus mode.
1.5.8.8. Erase
Same as in SD Bus mode.
1.5.8.9. Write Protection
Same as in SD Bus mode.