Owner's Manual

Introduction
5
Installation
To install the iXpand Drive App, continue with the followings steps:
1. Connect the iPhone or iPad device to the Internet.
2. On the iPhone or iPad home screen, find and tap on the App Store.
3. Located at the bottom of the screen, tap on Search.
4. In the search field, type iXpand Drive and tap Search.
5. Locate the SanDisk iXpand Drive app icon and tap on Install.
Figure 1-1. iXpand Drive App Icon
Initial Setup Requirements
Initial setup requires a mobile device with a compatible operating system and Internet access.
Note, an iOS device and with iCloud Photo Library Sync enabled may take longer than usual
during the initial backup process. To avoid additional data charges, upload data over a Wi-Fi®
connection.
To disable cellular data use from the SanDisk iXpand Drive app, proceed with the following
steps:
1. On the mobile device, tap the Settings icon.
2. Tap on Cellular.
3. Locate iXpand Flash Drive app.
4. Toggle switch to Disable.
Additionally, backup times can be shortened when disabling iCloud Sync from the iPhone and
re-enabling iCloud Sync after a successful backup.
To disable iCloud Sync, proceed with the following steps:
1. On the mobile device, tap the Settings icon.
2. Tap on Apple ID, iCloud, iTunes & App Store menu.
3. Tap on iCloud.
4. Tap on the Photos menu and toggle iCloud Photo Library to Off.