Specifications

Infrastructure ■ You must remove the U3 support before using the device as a boot medium. For
the U3 Titanium device, you can use the U3 Launchpad Removal Tool on a
Windows-based system to remove the U3 features. The tool is available for
download at http://www.sandisk.com/Retail/Default.aspx?CatID=1415. (To restore the
U3 features, use the U3 Launchpad Installer Tool accessible at
http://www.sandisk.com/Retail/Default.aspx?CatID=1411). [PR/102645]
■ If the router does not have an ARP entry for an IP address, it drops the first
packet from itself to that IP address. [PR/233867]
■ On J2320, J2350, J4350, and J6350 Services Routers, when you press the F10
key to save and exit from BIOS configuration mode, the operation might not
work as expected. As a workaround, use the Save and Exit option from the Exit
menu. This issue can be seen on the J4350 and J6350 routers with BIOS Version
080011 and on the J2320 and J2350 routers with BIOS Version 080012.
[PR/237721]
■ On J2320, J2350, J4350, and J6350 Services Routers, the Clear NVRAM option in
the BIOS configuration mode does not work as expected. This issue can be seen
on the J4350 and J6350 routers with BIOS Version 080011 and on the J2320 and
J2350 routers with BIOS Version 080012. To help mitigate this issue, note any
changes you make to the BIOS configuration so that you can revert to the default
BIOS configuration as needed. [PR/237722]
■ If you enable security trace options, the log file might not be created in the default
location at /var/log/security-trace. As a workaround, manually set the log file to
the directory /var/log/security-trace. [PR/254563]
Interfaces and Chassis ■ The link status of the onboard Gigabit Ethernet interfaces (ge-0/0/0 through
ge-0/0/3) or the 1-port Gigabit Ethernet ePIM interface on J4350 and J6350
Services Routers fails when you configure these interfaces in loopback mode.
[PR/72381]
Routing ■ Asymmetric routing, such as tracing a route to a destination behind J-series
routers running JUNOS software with enhanced services with Virtual Router
Redundancy Protocol (VRRP), does not work. [PR/237589]
System ■ The ping status of the generic routing interfaces (gr-x/y/x) connection established
through the ISDN simulator fails. As a workaround, deactivate and reactivate the
generic routing interfaces. [PR/282588]
VPN ■ The proxy-identity statement is valid for route-based VPN configuration only.
Policy-based VPN does not support the proxy-identity statement. [PR/296468]
WXC Integrated
Services Module
When two J-series routers with WXC Integrated Services Modules (WXC ISM
200s) installed are configured as peers, traceroute fails if redirect-wx is configured
on both peers. [PR/227958]
■
■ JUNOS software with enhanced services does not support policy-based VPN with
WXC Integrated Services Modules (WXC ISM200s). [PR/281822]
Outstanding Issues ■ 7
Outstanding Issues