Specifications

■ In a chassis cluster, J-Web does not enable you to configure the address book.
We recommend that you use the command-line interface (CLI) to configure the
address book. [PR/281986]
■ Chassis SNMP objects are not reporting correctly when a Services Router operates
in JSRP cluster mode with JUNOS software. [PR/304082]
■ You are not able to configure vlan-ids greater than 1023 on reth interfaces on
all platforms supporting chassis cluster. [PR/314636]
Class of Service J4350 and J6350 Services Routers might not have the requisite data buffers
needed to meet expected delay-bandwidth requirements. Lack of data buffers
■
might degrade CoS performance with smaller-sized (500 bytes or less) packets.
[PR/73054]
■ With a CoS configuration, when you try to delete all the flow sessions using the
clear security flow session command, the WX application acceleration platform
may fail over with heavy traffic. [PR/273843]
Enhanced switching ■ Traffic statistics are not updated on the ae interface. [PR/292749]
■ When a native VLAN is removed from a port, it still accepts untagged traffic and
untagged traffic is still transmitted out of it. Restarting chassisd corrects this
behavior. [PR/299961]
■ If the access port is tagged with the same VLAN that is configured at the port,
the access port accepts tagged packets and determines the MAC. [PR/302635]
■ VLAN output traffic statistics are not being updated. [PR/305845]
Flow ■ OSPF over GRE over IPSec does not work. [PR/105279]
■ In JUNOS software with enhanced services, the TTL value on the Internet control
message protocol (ICMP) responses is set to 65. [PR/233844]
■ Even when forwarding options are set to drop packets for the ISO protocol family,
the router forms End System-to-Intermediate System (ES-IS) adjacencies and
transmits packets because ES-IS packets are Layer 2 terminating packets.
[PR/252957]
■ When heartbeat signals are sent to an interface at the server side, the counter
on that interface does not increment even after considerable wait time.
[PR/273901]
■ OSPF over a multipoint interface connected as a hub-and-spoke network does
not restart when a new path is found to the same destination. [PR/280771]
■ On J-series Services Routers, outbound filters will be applied twice for
host-generated IPv4 traffic. [PR/301199]
6 ■ Outstanding Issues
JUNOS Software with Enhanced Services 9.2 for J-series Services Router Release Notes