User Manual

CompactFlash
®
Memory Card Product Manual, Rev. 10.0 © 2002 SANDISK CORPORATION 2-1
2. Product Specifications
For all the following specifications, values are defined at ambient temperature and nominal supply voltage unless
otherwise stated.
2.1. System Environmental Specifications
Table 2-1. Environmental Specifications
Temperature Operating:
Non-Operating:
0° C to 60° C
-25° C to 85° C
Humidity Operating:
Non-Operating:
8% to 95%, non-condensing
8% to 95%, non-condensing
Acoustic Noise 0 dB
Vibration Operating:
Non-Operating:
15 G peak to peak maximum
15 G peak to peak max
Shock Operating:
Non-Operating:
2,000 G maximum
2,000 G maximum
Altitude
(relative to sea level)
Operating:
Non-Operating:
80,000 feet maximum
80,000 feet maximum
2.2. System Power Requirements
Table 2-2. Power Requirements
DC Input Voltage (VCC)
100 mV max. ripple (p-p)
3.3V ±5% 5V ± 10%
(Maximum Average Value) Sleep:
See Notes. Reading:
Writing:
Read/Write Peak:
200 µA
21 mA
21 mA
100 mA
500 µA
34 mA
34 mA
100 mA
NOTES: All values quoted are typical at ambient temperature and nominal supply voltage unless otherwise stated.
Sleep mode currently is specified under the condition that all card inputs are static CMOS levels and in a
“Not Busy“ operating state.
The currents specified show the bounds of programmability of the product.