Datasheet

SOLID STATE FOR BUSINESS
Corporate Headquarters:
951 SanDisk Drive
Milpitas, CA 95035-7933, USA
www.sandisk.com
Contact information
[e-mail]
Specifications subject to change without notice.
*
As compared to 7200 RPM SATA 2.5” hard drive. Based on published
specifications and internal benchmarking tests.
1
Up to stated speed. Performance is based on the CrystalDiskMark benchmark
using a 1000MB LBA range on Gigabyte GA-Z77X-UD5H desktop with Intel
Z77 chipset, Intel i7-3770 3.4GHz, 8M, Ivy Bridge, Windows 8 64-bit SP1 using
Intel iRST version 11.7.0.1013, secondary drive, C-state o. Performance may
vary based on host device. 1 megabyte (MB) = 1 million bytes. IOPS = input/
output operations per second.
2
Endurance of the Z400s SSD is calculated using JEDEC client workload
(JESD219). TBW = terabytes written.
3
Power measurements 25°C. Based on FW version with HIPM-enable.
4
MTTF = Mean Time To Failure based on internal testing using Telcordia stress
part testing.
5
3 year warranty in regions not recognizing “limited”. See www.sandisk.com/
wug for more details.
Low Power
The Z400s utilizes breakthrough
SanDisk technology that optimizes
power consumption, making it one
of the lowest power consuming
SSDs at 30mW for average power.
This increases the amount of usable
hours per battery charge, which is
essential for modern mobile devices.
TCO
SanDisk SSDs are more reliable
than HDDs, which can improve
total cost of ownership (TCO) by
reducing downtime due to hard
drive failures. They also oer lower
latency and greater read/write
speeds over traditional HDDs
*
, so
users may experience a noticeable
improvement in responsiveness.
IT departments can extend the
useful life of their PC inventory by
upgrading the HDDs to the Z400s
SSD, thus prolonging replacement
cycles and maximizing asset value.
SanDisk® Z400s SSD Product Features and Specifications
Specifications are preliminary and subject to change
Device SanDisk Z400s SSD
Form Factor 7mm 2.5-inch, M.2 (2242 & 2280), mSATA
Interface SATA III (6 Gb/s) backward compatible to SATA II and I
Size & Weight
2.5”: 7.00mm x 69.85mm x 100.5mm @ 30 ± 1g
M.2 2242: 3.50mm x 22.00mm x 42.0mm @ 4.1 ± 0.6g
M.2 2280: 2.23mm x 22.00mm x 80.0mm @ 5.5 ± 0.5g
mSATA: 3.82mm x 29.85mm x 50.8mm @ 5 ± 0.5g
Performance [4KB QD32]
1
32GB 64GB 128GB 256GB
Seq. Read up to (MB/s) 279 546 546 546
Seq. Write up to (MB/s) 48 94 182 342
Rand Read up to (IOPS) 17,300 32,900 35,500 36,600
Rand Write up to (IOPS) 10,600 21,700 43,300 69,400
Endurance (TBW)
2
20 40 72 72
Power 32GB 64GB 128GB 256GB
Average Power (mW)
3
30 30 30 30
Active Power (W)
3
1.6 1.6 1.6 1.6
Max Read Operating (mW) 1,200 1,600 1,600 1,600
Max Write Operating (mW) 1,300 1,500 1,900 2,600
Slumber (mW) 14 14 14 14
DEVSLP (mW) ≤3 ≤3 ≤3 ≤3
Reliability
MTTF
4
Up to 1,750,000 hours
Environmental
Operating Temperatures 0°C to 70°C
Non-operating Temperatures -55°C to 85°C
Operating Vibration 5.0 gRMS, 10 – 2000 Hz
Non-operating Vibration 4.9 gRMS, 7 – 800 Hz
Shock 1,500 G @0.5 msec half sine
Certifications FCC, UL, TUV, KC, BSMI, VCCI
Form Factor Capacity SKU #
2.5” 7mm 32GB SD8SBAT-032G
2.5” 7mm 64GB SD8SBAT-064G
2.5” 7mm 128GB SD8SBAT-128G
2.5” 7mm 256GB SD8SBAT-256G
mSATA 32GB SD8SFAT-032G
mSATA 64GB SD8SFAT-064G
mSATA 128GB SD8SFAT-128G
M.2 2242 32GB SD8SMAT-032G
M.2 2242 64GB SD8SMAT-064G
M.2 2242 128GB SD8SMAT-128G
M.2 2280 64GB SD8SNAT-064G
M.2 2280 128GB SD8SNAT-128G
M.2 2280 256GB SD8SNAT-256G
Ordering Information
©2015 SanDisk Corporation. All right reserved.
SanDisk is a trademark of SanDisk Corporation, registered in
the United States and other countries. Other brand names
mentioned herein are for identification purposes only and may
be the trademarks of their holder(s).
Pack-Out Option Use:
-1122 = Individual Package