User`s manual

6
To replay the previous song from the beginning, turn
the Bottom Twist to the Left.
To rewind the current song, turn the Bottom Twist
to the left and hold it.
shake feature
The shake feature is used to skip to another track
(song) randomly. Please execute the following steps
to enable the shake feature.
1) Turn on your Sansa Shaker
™
player.
2) Make sure the music is playing.
3) Hold the player with the speaker facing up.
4) Press and hold the Power/Play/Pause button.
5) Shake the player up and down 1 time. You should
hear a shutter sound indicating that the Sansa
Shaker
™
successfully skipped to another song.
Shaker Sounds
The Sansa Shaker player is triggered to make sound
effects with the following audio clips during these ac-
tions:
Single UH-OH sound occurs when:
• SD card is removed from the slot
• Pressing the Play button without SD card in the slot
• The SD card inserted in the slot is damaged
• Low battery level
Double UH-OH sound occurs when inserting an empty
SD card (no MP3 files or WAV files loaded on the
card).
POP sound occurs when inserting a SD Card with valid
music content into player while it is turned on.
SHAKE sound occur when you shake the player while
pressing and holding the PLAY/PAUSE button during
music playback. This will cause the player to randomly
skip to next song.
LASER sound occurs when you shake the player when
it is in PAUSE mode.
DRUM ROLL UP sound occurs when turning on
Shaker player.
DRUM ROLL DOWN sound occurs when shutting
down the Shaker player.