User`s manual

5
4) Wait until the ‘The USB Mass Storage Device
can now be safely removed from the system’
message appears.
5) Remove the USB cable from the Sansa Shaker
™
player and the computer.
Turn Shaker Player On
To turn on the Sansa Shaker
™
player, press and hold
the Power/Pause/Play button for approximately 2
seconds or until you hear a ‘Drum Roll Up’ sound.
Turn Shaker Player Off
To turn off the Sansa Shaker
™
player, press and hold
the Power/Play/Pause button for approximately 5
seconds or until hear a short ‘Drum Roll Down’ sound.
Listen to Music
1) Plug the headphones (included) into the Head-
phone jack on either the sides of the unit.
2) Turn on the Sansa Shaker
™
player. The music will
automatically start playing shortly.
3) To pause, press the
Power/Play/Pause button
once. The LCD will blink twice approximately every
3 seconds while the music is paused. The player will
turn off automatically after approximately 3 minutes
in pause.
4) To resume playing, press the
Power/Play/Pause
button. The LCD will blink while the music
is playing.
Note: The Sansa Shaker player will only play MP3 or PCM WAV files.
Volume coNtrol
To turn up the volume, turn the Top Twist to the right.
To turn the volume up fast, turn the Top Twist to the
right and hold it.
To turn down the volume, turn the Top Twist to the
left. To turn the volume down fast, turn the Top Twist
to the left and hold it.
skippiNg track
To skip to the next song, turn the Bottom Twist
to the right.
To fast forward the current song, turn the Bottom
Twist to the right and hold it.