User's Manual

Basic Usage

FM Presets

1) To program the preset Radio stations, press the Submenu (Down)

button in Radio mode.

2) Select Add this Preset to save the current frequency into presets.

3) Select the Delete a Preset to remove the current frequency from the

presets.

4) Select the View All Presets to view all preset frequencies.

a. Select Auto-scan for Presets to allow the Sansa c200 player to

automatically scan and store all available FM radio stations to preset.

You can store up to 20 radio preset stations.

Note: This action will erase all presets you have set previously

b. Press the Left (|<<) button to return to the Radio Options.

5) Press the Left (|<<) button to return to the Radio playback menu.

Recording Mode

NOTE: For Home and Personal Use

This product is intended to be used for recording and playback for your home and

personal enjoyment. Copying and commercial use of copyrighted material without

permission of the copyright owner may be prohibited by law. Use of your media player,

in compliance with all copyright and applicable intellectual property laws, remains the

responsibility of the user of the product.

Voice Recording

Sansa player has a built-in microphone allowing you to record your voice, an

interview or a speech. The recorded audio files will be saved in the RECORD

folder. To use the voice recording function, please execute the following

instructions.

1) Press the Menu button to return to the Main Menu.

2) Press the REC button at the side of the Sansa c200 player for

approximately 2 seconds.

a. Or, select Voice from the Main Menu.

3) A Record screen will appear. Press the Play/Pause (>||) button to

begin recording.

a. To pause the recording, press the Play/Pause (>||) button.

b. To resume recording, press Play/Pause (>||) again.

c. To stop the recording, press the Select button.

d. A confirmation message will appear on the screen. Select Yes to

save the recording.

4) Select the Menu button to return to Main Menu.