User's Manual

Getting Started
9
Hold Switch
The Hold Switch is located on the side of the device, and is used to prevent any
accidental operation. Once the Hold Switch is moved to the lock position, all
function keys will be disabled. The buttons on the player will not operate when the
Hold Switch is active (Orange Color visible).
Connecting to the computer
Please execute the following steps:
1) Connect the larger end of the USB cable into the dock connector of the Sansa
player.
2) Connect the smaller end of the USB cable to an available USB port on the
computer.
3) Once connected to computer:
a. The Sansa c200 player display screen should say Connected.
b. The computer’s Operating System will detect the player automatically. and
prompt user to choose one of the following options.
The player will appear as Sansa c200 Portable Media Player in My Computer.
Loading Photos and Images
You need to use the Sansa Media Converter (available to download at
www.sandisk.com/support/sansa
) to transfer photos to your Sansa player.