User guide

2
Playing Music ` 9
This chapter helps you get started playing music
on your SanDisk Digital Audio Player.
Playing Music
Your player can play music files stored in MP3 and WMA formats. This chapter shows you how
to upload and play your music files.
Connecting and Disconnecting
Your player includes a USB connection cable so that you can transfer music files from your
computer to your player. The small end fits into the USB port at one end of your player. The
larger flat end connects to the USB port on your computer.
To play music, first upload files from your computer to your player. Follow these steps:
1. Use the USB connector cable provided your player to connect the USB port on your
player to an open USB port on your computer. The player will appear as a new hard
drive on your computer. (Can’t find the USB port on your player? See The Basic
Controls section on page 4.)
2. Drag your music files to the player or save music files to your player with software
tools like Musicmatch, the same as you save files on your hard drive from Microsoft
Word or other applications.
Using the Music Controls
Your player has three modes of operation: Audio Play for music, FM Radio for radio, and Voice
Record to record notes and meetings. To play your MP3 and WMA files, you need to be in
Audio Play mode. Follow these steps:
1. Press the Play/Stop button for two seconds. The SanDisk Welcome message will
appear onscreen for a moment then disappear. See The Basic Controls section
on page 4 to find the Play/Stop button.