User guide

Cruzer Professional User Guide

Rev. 1.0

3.3 Changing the Size of the Privacy Zone

Caution! Changing the size of your Privacy Zone requires formatting your Cruzer

Professional, causing ALL secured and non-secured data to be lost.

To change the size of the Privacy Zone:

1. Click Format in the Settings window. The Format window is displayed, as

shown in (Figure 3).

2. Enter the new password and confirm it by entering it a second time.

3. Enter a hint in case you forget your password.

4. Set the new size of your Privacy Zone using the slide bar.

5. Click Format. The Cruzer Professional Format Warning window is displayed, as

shown in (Figure 4).

6. Click OK to reformat your Cruzer Professional and create a new Privacy Zone.

To remove the Privacy Zone:

1. Set the size of your Privacy Zone to 0% using the slide bar.

2. Click Format. A message is displayed (Figure 18) warning you that your

DiskOnKey will not have a Privacy Zone.

Figure 18: Removing the Privacy Zone

3. Click Yes. The Format Warning window is displayed, as shown in Figure 3.