Product manual

SanDisk Industrial Grade CompactFlash 5000 Product Manual

Figure 1 below illustrates the block diagram of the SanDisk High Level

CompactFlash card.

Figure 1: SanDisk High Level CompactFlash Card Block Diagram

1.2 Features

SanDisk CompactFlash 5000 provides the following system features:

• Non-volatile storage (no battery required)

• Up to 8 GB of mass storage data based on SanDisk reliable SLC flash

technology

• Fixed and Removable configurations

• PC Card ATA compatible

• True IDE Mode compatible

• Low power consumption

• High performance:

Read & Write sustained performance of 30MB/sec

• Rugged – Complies with MIL-STD-810F

• Low weight

• Silent

• Low Profile

• +5 Volt or +3.3 Volt operation

• Automatic 8 bit error detection / error correction

• Supports power down commands and sleep modes

• MTBF > 4,000,000 hours

• Minimum 10,000 insertions