Instructions / Assembly
6
Please retain these instructions for future reference.
Do not stand on or use any pa of this item as a step ladder.
Firmly secure all bolts, screws, and knobs before use.
Reconrm that all bolts, screws, and knobs are secure eve 90 days.
Fasten screws loosely during initial assembly. Do not rmly tighten the screws until the item
is completely assembled.
•
•
•
Do not use or store this item in the proximity of open ame or ammable/combustible chemicals.•
Be aware that some pas are heavy and have sharp edges.•
Do not use this item in a way inconsistent with the manufacturer’s instructions as this could
void the product warranty.
•
If any pas are missing, broken, damaged, or worn, stop using this item until repairs are made
and/or facto replacement pas are installed.
•
•
NOTICE
Barn Door hardware installation
Product Content
1.1,
2.1,
3.1,
3.2,
3.3,
Rail
Anchor
Lag Bolt
Wall Spacer
4 x Door Screw
2 x Hanger
2.2,
(For concrete wall)
(For wood stud)
4.2,T-Shape Floor Guide
4.3,Roller Floor Guide
4.1,2 x Door Stopper
4.4,2 x Rubber End
1 x Handle Pull and Flush5.1,
Tools Needed
5,
Level
Tape Measure
8,
Drill
6,
1,
Pencil
Wrench
2,
4,
Plumb Bob
3,
Phillips Screwdriver
7,
Drill Bit
Ø / ”
Ø / ”