Specifications

17
REMOTE CONTROL
The Crossover/amplifier may be operated by a remote control. The remote comes pre-programmed for correct
operation.
The “Bass”, “Midrange”, and “Level” function may directly be selected by the numbers 1, 2, or 3 on the keypad.
Or you may sequence through them by repeatedly pressing the silver button in the middle of the upper cursor pad.
The level of each of the functions may be increased or decreased by pressing either the Volume up/down keys or the
Channel up/down keys.
If you have a Sanders Sound Systems’ Remote Control Preamplifier, the Crossover/amplifier also can be operated
by the remote control transmitter that comes with the preamp. The preamp's remote comes pre-programmed for
crossover operation.
Operation is done by first being sure that the word “AUDIO” appears at the top of the display. If the “MAIN”
menu is on the screen, select “AUDIO” to get to the preamp's audio control screen.
The crossover/amp control functions are on the second page of the “AUDIO” control screen. Press either the
“pgup” or the “pgdn” button to get to the second page.
On the second page, you will see “XOVER.” This is the Function Selector that will sequence through the three
functions (Bass, Midrange, Level). When the appropriate indicator light is on, press the “Channel UP or DOWN”
buttons to increase or decrease the level. Do not press the “Volume UP or DOWN” buttons as these control the
preamplifier volume — use the Channel buttons instead.
This is a very sophisticated, computer-controlled transmitter, into which you can put the IR codes from all your
remotes and eliminate the pile of remotes that you now have to dig through every time you want to operate some-
thing. So don't waste it. Use it to control all your components from one unit. This is a truly amazing unit and you
will be richly rewarded by reading its booklet and taking the time to program it.