Specifications

16
It is almost impossible to blow a amp fuse while playing music. So a blown fuse suggests that the problem
was caused by shorting out the speaker cables while the amplifier is on. It is hard to avoid touching the
cables together when changing them, so make it easy on y ourself (and the amplifier) by turning off the
amplifier and waiting for the lights to fade out before changing speaker cables.
If an indicator light is out, then that amplifier module may have failed. There are power supply fuses inside
the amplifier, but these will usually blow only if a failure has occurred in the amplifier. So do not open the
top and replace a blown fuse as it will almost surely just blow again. Instead, contact the factory for advice.
Phone [phone]. All contact information is on the website www.sanderssoundsystems.com.