Specifications

13
The mains voltage can be selected so that the amplifier can be used anywhere in the world. To do so, remove the
fuse drawer and look inside where the drawer fits. You will see a white plastic "star" that shows the voltage on it.
Remove this star by pulling it straight out of the amplifier. You can do this by putting your little finger or a ball
point pen or small screwdriver into the recess on the left side of the star and pulling it out.
With the star in your hand, you will see that it has four sides and each side has a different voltage printed on it.
These are 100, 120, 220, and 240. Pick the one that best matches the mains voltage in your location. If your mains
voltage is 230, use 240 volts on the star.
Orient the star so that your voltage will face outward from the amplifier and show through the window in the drawer,
then push it back into the amplifier. You can now slide the drawer back into place and press firmly against its
spring until it is flush and the latch "snaps" and holds the drawer in place.
CLEANING / MAINTENANCE
The speakers do not require any maintenance. You may dust them as you would any fine furniture. You may use
furniture wax on the cabinets as you would any fine furniture.
Never spray any substance into the electrostatic cells, as the electrostatic diaphragms could be damaged. If the
electrostatic panels are dusty, you may gently wipe them with a damp sponge.