Owner Manual

Assembly instructions
1. Assembling the fixture body
□ Carefully unpack the fixture, lay out all parts
on clean surface.
□ Screw the lower pole (D) to top of the fixture
body (E).
□ Screw the metal ring (C) to top of the lower
pole (D).
□ Screw the upper pole (B) to top of the metal
ring (C).
□ Screw the column assembly (A) to top of the
upper pole (B).
□ Attach the wood bead strings on column
assembly (A) to the metal ring (C).
□ Attach the wood bead strings (F) to the
metal ring (C) and fixture body (E) as shown.
□ Attach the wood lower ball (G) to bottom of
the fixture body (E).
2 Preparing the light fixture to hang
□ Attach the quick link (KK) to one end link of
chain (JJ) and attach the quick link (KK) to the
chain loop.
□ Remove the excess chain links from the chain (JJ)
in order to achieve the desired length for hanging
the fixture .
□ Thread the fixture wire and bare copper ground
wire up through every other link in the chain (JJ).
JJ
KK
To open a chain link: Use a pair of pliers and a
screwdriver as shown above to open a chain link.
Wrap the jaws of the pliers with cloth to protect
the finish of the chain.
Chain loop
A
B
C
D
E
F
G
Wood bead
strings
5
1
2
3
4
6
6
5
7