Assembly Instructions Caution: You must read this before you proceed Double Sunlounge Caution: This Double Sunlounge is NOT a TOY. Keep your child/children at bay during the assembly process. Whenever lifting or moving the Double Sunlounge and to prevent injury to yourself or damage to the Double Sunlounge, two adults are needed to execute these actions.
Part List Label Picture Description Qty A Foldable Seat Panel 1 B Left Leg Panel 1 C Right Leg Panel 1 D Front Leg Panel 1 E Wheel 2 F Leg Support Bar 1 G Foldable Cushion 1 2 of 9
Hardware Label Picture Description Qty ① Allen Key 2 ② Bolt (M6*35mm) 5 ③ Bolt (M6*70mm) 9 ④ Sleeve Nut (M6*15mm) 3 ⑤ Bolt for Wheel (M8*55mm) 3 ⑥ Iron Tube for Wheel (8*8*23) 3 ⑦ Washer (8*20*2mm) 5 ⑧ Sleeve Nut (M8*15mm) 3 ⑨ Screw (M7*60mm) 3 3 of 9
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Right Leg Panel (C) Left Leg Panel (B) Foldable Cushion (G) Wheel (E) Front Leg Panel (D) Leg Support Bar (F) Foldable Seat Panel (A) FRONT FACING This Double Sunlounge has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Double Sunlounge parts, the above picture is to help you put the various parts into perspective.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 2.1 2.2 2.1) With assistance from your adult partners, place the Foldable Seat Panel(A) onto a clean, non-marring surface, then unfold the Foldable Seat Panel(A) as pictured. Caution: Be careful of pinch points when opening the Foldable Seat Panel(A). 2.2) With assistance from your adult partners, place the Double Sunlounge facedown.
Step 3 3.1 3.3 3.2 3.1) Secure the Foldable Seat Panel(A) using Bolts(③), and Sleeve Nuts(④) with Allen Keys(①). 3.2) Attach Front Leg Panel(D) to Foldable Seat Panel(A) using Bolts(③) with Allen Key(①). 3.3) Unfold the pre-fixed Middle Leg as shown in above picture and secure it to Foldable Seat Panel(A) using Bolt(③) with Allen Key(①). Do not fully tighten the Bolts. Step 4 4.1 4.2 With assistance from your adult partners, align the Foldable Seat Panel(A) to Left Leg Panel(B). 4.
Step 5 With assistance from your adult partners, turn the Double Sunlounge onto the other side. Repeat the same process from Step 4 to attach Right Leg Panel(C) to Foldable Seat Panel(A) and Leg Support Bar(F). Do not fully tighten Bolts and Screw. Step 6 Attach Wheels(E) to Left Leg Panel(B) and Right Leg Panel(C) using Bolt for Wheel(⑤), Washers(⑦), Iron Tube for Wheel(⑥) and Sleeve Nut(⑧) in the sequence in the picture above. Do not fully tighten Bolts.
Step 7 EXERT pressure, floorwards, onto the Seat. This pressure will help the Legs and Seat Panel reach alignment at all joints. Check for wobbles. In a sequential manner, gradually tighten all Bolts and Screws until evenly secured. Place Foldable Seat Cushion(G) onto Double Sunlounge. Tie velcro straps on Foldable Seat Cushion(G) to Foldable Seat Panel(A) as shown above. Your Double Sunlounge is ready for use. This Double Sunlounge can only be used on a flat, level surface.
Care & Maintenance 9 of 9