Twin Bed Rails IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. ~ Part List H. Side Panel 2 pes. I Stretcher 3 pes. Hardware List 5/32° Quasars Washer Nut ] Wrangle Brit 8 pos. (+1 extra) 8 pes. {+1 extra) Wood Se raw 1pe. 8 pos. {+1 extra) 12 pes.
( Assembly Instructions 2/2 j IMPORTANT » Use a soft cloth between these parts and the floor. = Do not use power tools above 8 volts to assemble. » Do not tighten ali the screws until each part is properly assembled. » Keep Wrench in a safe place as the Nuts may need to be tightened up in the future. STEP 1 Insert Bolts into the per-drilled holes of Headboard and Foot board, STEP 2 Assemble Side Panels (H) to Headboard and Foot board using Square Washers and Nuts. Tighten all the Nuts with Wrench.
CARE INSTRUCTIONS NEVER NEVER allow liquids to remain on fumigate, use glass cleaners on Absorption causes parts to warp finished furniture. Ammonia and split and finishes to determinate. chemically attacks the finish. Do not use power tools Do ot page Do not write above 8 volts 1o assemble, indirect sunlight, directly on surface.
