Owner Manual

Rafter 36” Bathroom Vanity

Page 3 of 4

STEP 2

 Install the door by aligning the bottom of the door to the floor track and the top wheels of the door to the upper

track and then slide down into place.

 Once the door is in place and the top wheels are secured on the track, secure the door in place by inserting the

screws just below the wheels (see sketch below)

STEP 3

• With the vanity in its location and all plumbing in place, apply a bead of silicone to the unpolished back

side and bottom edge of the backsplash and secure it to the vanity and wall.

• Wipe away any excess silicone immediately.

Ensure that you apply the silicone to the rough

edge and that the smooth face is facing the front