Insert wooden dowel (A) into parts (2,7,8,9,10),then secure cam bolt (C) into parts (7,8) with Philips head screwdriver as per diagram.
Insert wooden dowel (A) into part (3),then secure cam bolt (C) into part (3) with Philips head screwdriver as per diagram.
Insert wooden dowel (A) into part (4), then secure cam bolt (C) into part (1) with Philips head screwdriver as per diagram.
Using bolt (F) attach part (H) to parts (5,6) with hex key (E) as per diagram.
Using screw (D) attach part (5) to part (4) with hex key (E) as per diagram.
Using cam lock (B) secure part (3) to parts (9,10) with Philips head screwdriver as per diagram.
Using cam lock (B) secure part (3) to parts (7,8) with Philips head screwdriver as per diagram.
Using cam lock (B) secure part (2) to part (8) with Philips head screwdriver as per diagram.
Using bolt (F) attach part (H) into parts (7,8) with hex key (E) as per diagram.
Using cam lock (B) secure part (2) to part (7) with Philips head screwdriver as per diagram.
Using bolt (F) attach part (H) into parts (7,8) with hex key (E) as per diagram.
Using screw (D) attach part (6) into parts (9,10) with hex key (E) as per diagram.
Using bolt (F) attach part (H) to parts (7,8) with hex key (E) as per diagram.
Attach the support leg as per diagram.
Using cam lock (B) secure part (1) with Philips head screwdriver as per diagram.
Place stickers (G) cover the holes as per diagram .
If necessary adjust the floor leveler at the bottom of the support leg to level the unit .
