Assembly Instruction

1
2
3
Take the allen wrench, and turn the bolts until the legs are secure.
DO NOT TIGHTEN COMPLETELY.
Stop when you feel you are adding force to tighten the bolt.
Stand chair up on an even surface and check that it is balanced.
If there is a slight wobble, apply downward
pressure in the corner where a leg is
uneven. Keeping pressure in that corner,
tighten all bolts.
If balanced, apply downward pressure
evenly in the center and tighten all bolt.
Do not over-tighten beyond hole depth.
Helpful tip:
-Instead of applying downward
pressure while reaching
under to tighten bolts,
have someone sit in the
chair while you tighten the bolts.