Full Product Manual

4. PROGRAMMING YOUR FINGERPRINT

On the inside of the safe door,

locate the brass cap.

Unscrew and remove the cap,

giving you access to the reset

buon.

Press the reset buon. You will

hear 1 beep and the indicator

ring will illuminate white on the

front of the door indicang that

you are now in programming

mode.

Inacvity Timeout: If this programming sequence is not completed within 10 seconds

the indicator ring will ﬂash red 5 mes and beep 5 mes. Return to step 2 to restart

this process.

PLACE AND HOLD the pad of your

ﬁnger on the scanner unl indicator

ring ﬂashes green once and beeps

once.

REPEAT at least 3 more mes unl

there are 2 consecuve beeps and

2 green ﬂashes.

If unsuccesful, the indicator Ring

will ﬂash red 5 mes and beep 5

mes. Repeat this secon again.

BEEP

HOLD FOR BEEP

LIFT FINGER

Step 2Step 3Step 4

BEEP

2 BEEPS + 2 GREEN FLASHES = SUCCESS!

Reset buon

located

under brass

cap

WHITE LED

GREEN LED

Step 1