Full Product Manual
7. TROUBLESHOOTING
6. PROGRAMMING ADDITIONAL FINGERPRINTS (Continued)
Complete secon 4 again for
each fingerprint zone you
would like to program.
NOTE:
If you experience any problems
reading your print, including
inconsistent readings, note the
area of your print that doesn’t
work properly, and specifically
reprogram that area.
This scanner will hold up to
100 different fingerprints.
In the event that you run into issues with programming and accessing your
safe, please read through this secon for answers to your quesons.
BEEP
BEEP
BEEP
HOLD FOR BEEP
LIFT FINGER
2 BEEPS + 2 GREEN FLASHES = SUCCESS!
Locked Out Of Your Safe
YOUR PROGRAMMED
FINGERPRINT IS NOT
READING AT ALL TIMES
SOLUTIONPROBLEM
Contact Customer Service at cs@sportsafieldsafes.com or (888) 792-4264
9
Placing a poron of a fingerprint on the scanner
that has not been programmed can result in an
error. We recommend programming mulple
areas of each fingerprint.
Make sure to hold down your finger on the
scanner instead of tapping. Scanner needs me
to complete the scanning process.
Fingerprints may lack definion due to excessive
skin dryness. We recommend applying
moisturizer or slide your fingerprint against your
forehead before scanning process.
GREEN LED
GREEN LED
THE SCANNER IS NOT
READING YOUR
FINGERPRINT
In the event you are locked out of your safe, use your backup keys to gain access and
follow the steps in Secon 4: Electronic Lock Security Code Setup Instrucons.
If you have lost your backup keys, or are sll having difficules, contact customer
service at the number below. Proof of purchase is required to obtain keys.