Full Product Manual

7
4. LOCKED OUT OF YOUR SAFE
In the event you have forgoen the safe's combinaon, your primary acon is to
reference your owners manual which has a copy of your combinaon.
If you have lost your owner's manual, or are sll having any difficules, contact
customer service at the number below. Proof of purchase is required to obtain
your combinaon.
4264
Contact Customer Service at [e-mail] or [phone]
5. INTERNAL LIGHTING
When the safe's handle is in the open
and unlocked posion, the internal
lighng is automacally acvated.
The lighng will be automacally
turned off when the handle is
returned to it's original locked
posion.
If you wish to have your lighng
acvated while accessing the
contents of your safe, be sure to keep
the handle in this open and unlocked
posion.
Internal Light
1.
Locate the 2xAA baeries.
Install them into the baery
compartment on top of the
door panel in the proper
orientaon. The unit will
beep when baeries are
successfully installed.
Replace baery cover.
Step 5
WARNING: The baeries must be inserted with the correct polarity. Exhausted baeries
must be removed from the product and discarded safely. Do not mix old and new
baeries. Do not mix alkaline or standard (carbon – zinc) baeries. Do not use recharge-
able (nickel – cadmium) baeries.