Technical data

31
5.18 Activate/Deactivate Buzzer
This command allows user to activate and deactivate the buzzer feature.
Setup format：＃「username」,「Password」,「Function Code」,「Buzzer Mode」＊
Example：＃username,0000,19,0＊
The table 5.18.1 describes the meaning of each segment in the message above.
Table 5.18.1
The table 5.18.2 shows each confirmation message reply after setup.
Table 5.18.2
Text Keyed In SMS Description
# Start sign.
username  Default ID of GC-101.
 If you have changed the Username, please use the updated one.
0000  Default password.
 If you have changed the password, please use the updated one.
18 Mode 18 is to setup the IP address
0 When Buzzer mode is “0”, buzzer is deactivated. 0
1 When Buzzer mode is “1”, buzzer is activated.
* End sign.
Situation Message Reply
1 [username] + Device buzzer is turned on Setup Succeeds
0 [username] + Device buzzer is turned off
Setup Fail [username] + Device setup fail.
GC-101 is in Emergency Mode [username] + in emergency, buzzer setting is not allowed.