Technical data

5.17 Activate/Deactivate Overhearing

This command allows user to activate and also deactivate the overhearing feature. When the overhearing is deactivated, the dial

polling will then be allowed. In dialing polling mode, when the device receives a call (with caller ID), it will send the position data

according to the preset router.

Setup format：＃「username」,「Password」,「Function Code」,「Microphone mode」＊

Example：＃username,0000,8,1＊

The table 5.18.1 describes the meaning of each segment in the message above.

Table 5.17.1

The table 5.18.2 shows each confirmation message reply after setup.

Table 5.17.2

Text Keyed In SMS Description

# Start sign.

username  Default ID of GC-101.

 If you have changed the Username, please use the updated one.

0000  Default password.

 If you have changed the password, please use the updated one.

8 Mode 18 is to setup the IP address

1 When Microphone mode is “1”, overhearing is activated. This is the default. 1

2 When Microphone mode is “2”, overhearing is deactivated and dial (voice) polling is allowed.

* End sign.

Situation Message Reply

[username] + Device is switching to MIC mode Setup Succeeds

[username] + Device is switching to voice polling mode

Setup Fail [username] + Device setup fail.

GC-101 is in Emergency Mode [username] + in emergency, MIC setting is not allowed.