Technical data

29
5.16 Setup TCP and UDP address
After setting up the TCP or UDP router, user needs to setup the TCP or UDP address or port to listen to the data sent from GC-101.
Setup format：＃「username」,「Password」,「Function Code」,「IP Address」＊
Example：＃username,0000,18,202.39.31.179:1337＊
The table 5.16.1 describes the meaning of each segment in the message above.
Table 5.16.1
The table 5.16.2 shows each confirmation message reply after setup.
Table 5.16.2
Text Keyed In SMS Description
# Start sign.
username  Default ID of GC-101.
 If you have changed the Username, please use the updated one.
0000  Default password.
 If you have changed the password, please use the updated one.
18 Mode 18 is to setup the IP address
202.39.31.179:1337 The IP address. The port number (1337) is assigned after the “:” sign.
* End sign.
Situation Message Reply
Setup Succeeds [username] + Device TCP/UDP is updated.
Setup Fail [username] + Device TCP/UDP setup fail.
GC-101 is in Emergency Mode [username] + in emergency, TCP/UDP setting is not allowed.