Instruction Manual

97
After ‘②’  choose [3. Collective FEC Receiving]  choose [On] or [Off] by [Enter]
 return and saved to Main Menu by pressing [ESC].
ⓔ setting [4. Maximum FEC Error Ratio]
- If error rate is higher than setting value, when FEC Mode receiving, receiving
will be stopped.
(example, if error rate is set to 30% and receiving error rate is more than
30%, then receiving will be stopped.)
- setting
after ‘②’  choose [4. Maximum FEC Error Ratio]  [Enter]  input [number]
 [Enter]  return and saved to Main Menu by pressing [ESC].
[ Ref. ] ☞ input value range is 1~100.
ⓕ Setting [5. NAVTEX Station Selection]
- Allow receiving NAVTEX signal and by the initial character of the broadcast
name from A ~ Z by [right, left button].
- The way of setting
After ‘②’  choose 5. NAVTEX Station Selection]  [Enter]  NAVTEX
Station Selection will appear.  Choose initial character of the broadcast
station by [left/right arrow button] and [Enter]  save and return to System
setting Menu by pressing [ESC]
• O : NAVTEX recognized as receivable broadcast station name.
• X : NAVTEX recognized as non-receivable broadcast station.
ⓖ setting [6. NAVTEX Message Selection]
- Allow receiving NAVTEX message from C, E ~ Z by choosing initial character
by [left / right arrow button].
- The way of setting
After ‘②’  choose [6. NAVTEX Message Selection]  [Enter]  NAVTEX
Message Selection will appear  choose initial message character by
[left/right arrow button] and [Enter]  save and return to System setting
Menu by pressing [ESC]
• O : recognized as NAVTEX beginning message.
• X : not recognized as NAVTEX beginning message.
[ Ref. ] ☞ A, B, D are always set receivable.
ⓗ setting [7. NAVTEX ID Data Clear]
- Delete received NAVTEX broadcast ID.
- The way of setting