Instruction Manual

91
⚫ [F2] : [2Hereis] – transmit answering code of your vessel (Answer back code).
⚫ [F3] : [3TMS] – transmit current time.
⚫ [F4] : [4F.send] – transmit an edited file at edit mode. (refer to ‘14-5-5 transmitting
file )
⚫ [F5] : [5Macro] – use sentence number created at Macro Command.(refer to ‘14-5-6
transmitting Macro Command )
⚫ [F8] : [8Stop] – communication stop.
⚫ [F9] : [9VOL-] – reducing speaker volume.
⚫ [F10] : [0VOL+] – increasing speaker volume .
11-5-4 RECEIVING FEC MODE
① When received data at [FEC] mode, automatically printed and after receiving the data
will be saved.
② In order to open the file press [F10]  [5. Editor]mode choose  [Enter]  [F1](1 Lord)
 RECV 01 ~ choose file among RECV 20  press [Enter].
11-5-5 RECEIVING FILE
※ Carry out above 14-5-1 or 14-5-2 then follow below steps.
① Below screen will be displayed by pressing [F4]
② Press [ENT] key by selecting transmittable file via up and down arrow key.
③ Transmitting a file during displaying file information.
[ Ref. ] ☞ in order to stop transmitting, press [F8].
11-5-6 TRANSMITTING MACRO COMMAND
※ Carry out above 14-5-1 or 14-5-2 then follow next below step.
① press [F5]  choose sentence number by [up/down arrow key]  transmit a file
during displaying Command information by pressing [Enter].
[ Ref. ] ☞ in order to stop transmitting press [F8].